Diffusion Model of a Non-Integer Order PIγ Controller with TCP/UDP Streams

In this article, a way to employ the diffusion approximation to model interplay between TCP and UDP flows is presented. In order to control traffic congestion, an environment of IP routers applying AQM (Active Queue Management) algorithms has been introduced. Furthermore, the impact of the fractional controller PIγ and its parameters on the transport protocols is investigated. The controller has been elaborated in accordance with the control theory. The TCP and UDP flows are transmitted simultaneously and are mutually independent. Only the TCP is controlled by the AQM algorithm. Our diffusion model allows a single TCP or UDP flow to start or end at any time, which distinguishes it from those previously described in the literature.     

A new generation of visible-light-active photocatalysts—The alkaline earth metal bismuthates: Syntheses,compositions, structures,and properties

Semiconductor materials containing bismuth have attracted the attention of researchers over the past several decades, as a result of their high photocatalytic activity in various reactions and/or high efficiency in their photoelectric conversion of solar energy. This interest originated from the observations that bismuth-containing semiconductors have a sufficiently small bandgap, which makes them sensitive to radiation in the visible spectral range; thus, visible-light-active materials. Among the various bismuth-containing semiconductor materials, the bismuthates of alkaline earth metals are distinguished and describe into separate groups. This article reviews research on the known methods of obtaining bismuthates of various alkaline earth metals (magnesium, calcium, strontium, and barium), and further analyzes their composition, structure, and visible-light-active photocatalytic activity.     

The Active Sites of a Rod‐Shaped Hollandite DeNOx Catalyst

The identification of catalytically active sites (CASs) in heterogeneous catalysis is of vital importance to design and develop improved catalysts, but remains a great challenge. The CASs have been identified in the low‐temperature selective catalytic reduction of nitrogen oxides by ammonia (SCR) over a hollandite manganese oxide (HMO) catalyst with a rod‐shaped morphology and one‐dimensional tunnels. Electron microscopy and synchrotron X‐ray diffraction determine the surface and crystal structures of the one‐dimensional HMO rods closed by {100} side facets and {001} top facets. A combination of X‐ray absorption spectra, molecular probes with potassium and nitric oxide, and catalytic tests reveals that the CASs are located on the {100} side facets of the HMO rods rather than on the top facets or in the tunnels, and hence semi‐tunnel structural motifs on the {100} facets are evidenced to be the CASs of the SCR reaction. This work paves the way to further investigate the intrinsic mechanisms of SCR reactions.     

Direct Estimation of the Surface Location of Immobilized Functional Groups for Concerted Catalysis Using a Probe Molecule

The location of active sites during concerted catalysis by a metal complex and tertiary amine on a SiO₂ surface is discussed based on the interaction between the functionalized SiO₂ surface and a probe molecule, p‐formyl phenylboronic acid. The interactions of the probe molecule with the surface functionalities, diamine ligand, and tertiary amine, were analyzed by FT‐IR and solid‐state ¹³C and ¹¹B MAS NMR. For the catalyst exhibiting high 1,4‐addition activity, the diamine ligand and tertiary amine base exist in closer proximity than in the catalyst with low activity.     

载机平台光电转塔目标定位的仿真算法

目标定位是光电转塔典型功能和任务之一，对其定位精度的考量也是转塔作战技术指标之一，针对该问题，从理论和仿真角度进行了分析。分析目标定位中用到的坐标系及其相互转换关系，给出光电转塔视轴反演、有源目标定位、无源目标定位的算法流程，通过仿真实验加以验证，考虑了定位过程中可能的随机误差来源，并分析是否采用均值滤波及其对定位结果的影响，最后通过Monte-Carlo分析计算了定位精度。分析结果表明:1）有源定位比无源定位的精度高，在仿真假设条件下，精度约提高1倍；2）均值滤波后，定位精度有较大提升（约提高15倍）；3）18 km距离时典型无源定位精度在80%置信度条件下约为39.4 m；4）统计直方图反映出80%置信度CEP半径及最大误差距离随载机位置、姿态、转塔视轴等（体现在目标载机距离上）不同参数的变化结果。     

Optimization of Active Sites via Crystal Phase,Composition, and Morphology for Efficient Low-Iridium Oxygen Evolution Catalysts

Reducing the amount of iridium in oxygen evolution electrocatalysts without compromising their catalytic performances is one of the major requirements in proton-exchange-membrane water electrolyzers. Herein, with the help of theoretical studies, we show that anatase-type TiO₂-IrO₂ solid solutions possess more active iridium catalytic sites for the oxygen evolution reaction (OER) than IrO₂, the benchmark OER catalyst. Note that the same is not observed for their rutile-type counterparts. However, owing to their thermodynamic metastability, anatase-type TiO₂-IrO₂ solid solutions are generally hard to synthesize. Our theoretical studies demonstrate that such catalytically active anatase-type solid-solution phases can be created in situ on the surfaces of readily available SrTiO₃-SrIrO₃ solid solutions during electrocatalysis in acidic solution as the solution can etch away Sr atoms. We experimentally show this with porous SrTiO₃-SrIrO₃ solid-solution nanotubes synthesized by a facile synthetic route that contain 56 % less iridium than IrO₂ yet show an order of magnitude higher apparent catalytic activity for OER in acidic solution.     

Comparative absorption kinetics of seven active ingredients of Eucommia ulmoides extracts by intestinal in situ circulatory perfusion in normal and spontaneous hypertensive rats

Eucommia ulmoides Oliv. (E. ulmoides) is a valuable and nourishing medicinal herb in China that has been used in the treatment of hypertension. Given the fact that most traditional Chinese medicine is mainly used to treat disease, investigating the pharmacokinetics of traditional Chinese medicines in the pathological state is more useful than that in the normal state. However, the differences in the absorption kinetics of active ingredients of E. ulmoides extract between pathological and physiological conditions have not been reported. Therefore, in this study, the rat intestinal in situ circulatory perfusion model was used to investigate the differences in absorption kinetics of seven active ingredients of E. ulmoides extract in normal and spontaneously hypertensive rats, namely, genipinic acid, protocatechuic acid, neochlorogenic acid, chlorogenic acid, cryptochlorogenic acid, (+)-pinoresinol di-O-β-D -glucopyranoside and (+)-pinoresinol 4′-O-β-D -glucopyranoside. Our results indicate that the pathological state of spontaneous hypertension may change the absorption of active components of E. ulmoides extracts, and these findings may provide a reference for improving the rational use of E. ulmoides in the clinic.     

Efficient synthesis of branched poly(acrylic acid) derivatives via postpolymerization modification

The utility of pentafluorophenyl esters for the selective introduction of functional units and branch points in well-defined poly(acrylic acid) (PAA) derivatives is demonstrated using a combination of controlled radical polymerization and postpolymerization modification. Reversible addition-fragmentation chain transfer enables the synthesis of well-defined copolymers—poly(pentafluorophenyl acrylate-co-tert-butyl acrylate)—with the active ester repeat units serving as attachment points for reaction with primary amines, specifically tris(2-(t-butoxycarbonyl)ethyl)methyl amine (Behera's amine). Deprotection using trifluoroacetic acid removes both the backbone and side chain t-butyl esters to give a series of branched PAA derivatives containing novel tricarboxylic acid side chains that are well suited to complexation and multidentate interactions. Surprisingly, the active ester homopolymer is shown to have the highest reactivity with Behera's amine when compared to copolymers with lower incorporation of pentafluorophenyl esters, suggesting an intriguing interplay of neighboring group effects and steric interactions. The ability to tune the efficiency of postpolymerization modification gives a library of PAA derivatives.     

Hydroboration of Alkenes Catalysed by a Nickel N-Heterocyclic Carbene Complex: Reaction and Mechanistic Aspects

The pentamethylcyclopentadienyl N-heterocyclic carbene nickel complex [Ni(η⁵-C₅Me₅)Cl(IMes)] (IMes=1,3-dimesitylimidazol-2-ylidene) efficiently catalyses the anti-Markovnikov hydroboration of alkenes with catecholborane in the presence of a catalytic amount of potassium tert-butoxide, and joins the very exclusive club of nickel catalysts for this important transformation. Interestingly, the regioselectivity can be reversed in some cases by using pinacolborane instead of catecholborane. Mechanistic investigations involving control experiments, ¹H and ¹¹B NMR spectroscopy, cyclic voltammetry, piezometric measurements and DFT calculations suggest an initial reduction of the Ni^II precursor to a Ni^I active species with the concomitant release of H₂. The crucial role of the alkoxo-catecholato-borohydride species resulting from the reaction of potassium tert-butoxide with catecholborane in the formation of an intermediate nickel-hydride species that would then be reduced to the Ni^I active species, is highlighted.